Implementation of simultaneous multi-parameter monitoring based in LC-type passive wireless sensing with partial overlapping and decoupling coils
Keywords: 
Passive wireless sensing
Multiparameter sensing
LC sensors
Decoupling coil
Issue Date: 
2019
Publisher: 
MDPI AG
ISSN: 
1424-8220
Note: 
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Citation: 
Sancho, J.I. (Juan Ignacio); Perez, N. (Noemí); De No Legarán, J.(Joaquín); et al. "Implementation of simultaneous multi-parameter monitoring based in LC-type passive wireless sensing with partial overlapping and decoupling coils". Sensors. 19 (23), 2019, 5183
Abstract
Inductor–capacitor (LC) passive wireless sensors are widely used for remote sensing. These devices are limited in applications where multiparameter sensing is required, because of the mutual coupling between neighboring sensors. This article presents two effective decoupling techniques for multiparameter sensing, based on partially overlapped sensors and decoupling coils, which, when combined, reduce the mutual coupling between sensors to near zero. A multiparameter LC sensor prototype with these two decoupling mechanisms has been designed, simulated, and measured. This prototype is capable of simultaneously measuring four parameters. The measurements demonstrate that the changes in capacitance in one individual sensor do not affect the measurements of the other sensors. This principle has been applied to simultaneous wear sensing using four identical wear sensors.

Files in This Item:
Thumbnail
File
sensors-19-05183.pdf
Description
Size
3.42 MB
Format
Adobe PDF


Items in Dadun are protected by copyright, with all rights reserved, unless otherwise indicated.