Full metadata record
DC FieldValueLanguage
dc.creatorPazos, D. (David)-
dc.creatorCintins, A. (Arturs)-
dc.creatorCastro, V. (Vanessa) de-
dc.creatorFernández, P. (Pilar)-
dc.creatorHoffmann, J. (Jan)-
dc.creatorGarcía-Vargas, W. (Wilfredo)-
dc.creatorLeguey, T. (Teresa)-
dc.creatorPurans, J. (Juri)-
dc.creatorAnspoks, A. (Andris)-
dc.creatorKuzmin, A. (Alexei)-
dc.creatorIturriza-Zubillaga, I. (Iñigo)-
dc.creatorOrdas-Mur, N. (Nerea)-
dc.identifier.citationPazos, D. (David); Cintins, A. (Arturs); Castro, V. (Vanessa) de; et al. "ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying". Nuclear materials and energy. 17, 2018, 1 - 8es
dc.description.abstractOxide Dispersion Strengthened Ferritic Stainless Steels (ODS FS) are candidate materials for structural components in fusion reactors. Their ultrafine microstructure and the presence of a very stable dispersion of Y-Ti-O nanoclusters provide reasonable fracture toughness, high mechanical and creep strength, and resistance to radiation damage at the operation temperature, up to about 750 °C. An innovative route to produce ODS FS with composition Fe-14Cr-2W-0.3Ti-0.3Y2O3 (wt.%), named STARS (Surface Treatment of gas Atomized powder followed by Reactive Synthesis), is presented. This route avoids the mechanical alloying (MA) of the elemental or prealloyed powders with yttria to dissolve the yttrium in the ferritic matrix. In this study, starting powders containing Ti and Y are obtained by gas atomization at laboratory and industrial scale. Then, a metastable Cr- and Fe- rich oxide layer is formed on the surface of the powder particles. During consolidation by HIP the metastable oxide layer at Prior Particle Boundaries (PPBs) dissociates, the oxygen diffuses towards saturated solutions or metallic Ti- and Y-rich particles, and Y-Ti-O nano-oxides (mainly Y2TiO5) precipitate in the ferritic matrix. Detailed Microstructural characterization by X-ray Photoelectron Spectroscopy (XPS), X-ray Absorption Spectroscopy (XAS), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) of powders and consolidated materials is presented and correlated with mechanical behaviour.es_ES
dc.description.sponsorshipAuthors acknowledge ALBA synchrotron (Spain) for the provision of beamtime on the beam line BL22-CLAESS (Proposal 2016081797). Transmission electron microscopy observations were accomplished at Centro Nacional de Microscopía Electrónica, CNME-UCM. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Financial support from Basque Government through the ELKARTEK ACTIMAT 2016 project is also acknowledged.es_ES
dc.publisherElsevier BVes_ES
dc.subjectOxide dispersion strengthened ferritic stainless steels (ODS FS)es_ES
dc.subjectFusion reactorses_ES
dc.subjectRadiation damagees_ES
dc.titleODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloyinges_ES
dc.description.noteThis is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/BY-NC-ND/4.0/).es_ES
dadun.citation.publicationNameNuclear materials and energyes_ES

Files in This Item:
3.11 MB
Adobe PDF

Items in Dadun are protected by copyright, with all rights reserved, unless otherwise indicated.