Full metadata record
DC FieldValueLanguage
dc.creatorLarzabal-Primo, G.(Gorka)-
dc.creatorIsasti-Gordobil, N. (Nerea)-
dc.creatorRodriguez-Ibabe, J.M. (José María)-
dc.creatorUranga-Zuaznabar, P. (Peio)-
dc.date.accessioned2022-10-10T07:30:55Z-
dc.date.available2022-10-10T07:30:55Z-
dc.date.issued2018-
dc.identifier.citationLarzabal-Primo, G.(Gorka); Isasti-Gordobil, N. (Nerea); Rodriguez-Ibabe, J.M. (José María); et al. "Effect of microstructure on post-rolling Induction treatment in a low C Ti-Mo microalloyed steel". Metals. 8 (9), 2018, 694es
dc.identifier.issn2075-4701-
dc.identifier.urihttps://hdl.handle.net/10171/64410-
dc.description.abstractCost-effective advanced design concepts are becoming more common in the production of thick plates in order to meet demanding market requirements. Accordingly, precipitation strengthening mechanisms are extensively employed in thin strip products, because they enhance the final properties by using a coiling optimization strategy. Nevertheless, and specifically for thick plate production, the formation of effective precipitation during continuous cooling after hot rolling is more challenging. With the aim of gaining further knowledge about this strengthening mechanism, plate hot rolling conditions were reproduced in low carbon Ti-Mo microalloyed steel through laboratory simulation tests to generate different hot-rolled microstructures. Subsequently, a rapid heating process was applied in order to simulate induction heat treatment conditions. The results indicated that the nature of the matrix microstructure (i.e., ferrite, bainite) affects the achieved precipitation hardening, while the balance between strength and toughness depends on the hot-rolled microstructure.es_ES
dc.description.sponsorshipThis research was partially funded by Eusko Jaurlaritza (Basque Government). Grant number: PI-2014-1-129.es_ES
dc.language.isoenges_ES
dc.publisherMDPI AGes_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.subjectPlate rollinges_ES
dc.subjectStrengtheninges_ES
dc.subjectPrecipitationes_ES
dc.subjectInductiones_ES
dc.subjectTitaniumes_ES
dc.subjectMolybdenumes_ES
dc.subjectMicroalloyed steelses_ES
dc.subjectEBSDes_ES
dc.subjectMechanical propertieses_ES
dc.titleEffect of microstructure on post-rolling Induction treatment in a low C Ti-Mo microalloyed steeles_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.description.noteThis article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).es_ES
dc.identifier.doi10.3390/met8090694-
dadun.citation.number9es_ES
dadun.citation.publicationNameMetalses_ES
dadun.citation.startingPage694es_ES
dadun.citation.volume8es_ES

Files in This Item:
Thumbnail
File
metals-08-00694.pdf
Description
Size
17.34 MB
Format
Adobe PDF


Statistics and impact

Items in Dadun are protected by copyright, with all rights reserved, unless otherwise indicated.