Mechanical and microstructural features of plasma cut edges in a 15 mm thick S460M steel plate
Keywords:
Plasma cutting
Cut heat affected zone
Mini-tensile test
Steel plate
Residual stress
Note:
This article is an open access
article distributed under the terms and conditions of the Creative Commons Attribution
(CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Citation:
Aldazabal, J. (Javier); Martín-Meizoso, A. (Antonio); Klimpel, A. (Andrzej); et al. "Mechanical and microstructural features of plasma cut edges in a 15 mm thick S460M steel plate". Metals. 8 (6), 2018, 447
Statistics and impact
0 citas en
0 citas en
Items in Dadun are protected by copyright, with all rights reserved, unless otherwise indicated.