Development of a robotic device for post-stroke home tele-rehabilitation

This article is distributed under the terms of the Creative Commons Attribution 4.0 License (http://www.creativecommons.org/licenses/by/4.0/) which permits any use, reproduction and distribution of the work without further permission provided the original work is attributed as specified on the SAGE and Open Access pages (https://us.sagepub.com/en-us/nam/ open-access-at-sage).

Cita:

Díaz, I. (Iñaki); Catalán, J.M. (José M.); Badesa, F.J. (Francisco Javier); et al. "Development of a robotic device for post-stroke home tele-rehabilitation". Advances in mechanical engineering. 10 (1), 2018, 1 - 8

Resumen

This work deals with the complex mechanical design task of converting a large pneumatic rehabilitation robot into an electric and compact system for in-home post-stroke therapies without losing performance. It presents the new HomeRehab robot that supports rehabilitation therapies in three dimensions with an adaptive controller that optimizes patient recovery. A preliminary usability test is also conducted to show that its performance resembles that found in RoboTherapist 2D commercial system designed for hospitals. The mechanical design of a novel and smart twodimensional force sensor at the end-effector is also described.

URI :

https://hdl.handle.net/10171/64993

DOI:

10.1177/1687814017752302

Aparece en las colecciones:

DA - CEIT - Materiales y Fabricación - Artículos de revista

Ficheros en este ítem: